Service area: Available in California, Nevada, Arizona, Oregon, Washington, Idaho, Montana, Utah, Wyoming, Colorado, New Mexico, North Dakota, South Dakota, Texas, Oklahoma, Louisiana, Nebraska, Alabama, Arkansas, Connecticut, Delaware, Florida, Georgia, Illinois, Indiana, Iowa, Kansas, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, New Hampshire, New Jersey, New York, North Carolina, Ohio, Pennsylvania, Rhode Island, South Carolina, Tennessee, Vermont, Virginia, West Virginia and Wisconsin.
A tight-fitting respirator protects only if it seals to the wearer’s face. Federal OSHA at 29 CFR 1910.134(f) and Cal/OSHA at 8 CCR 5144(f) require a fit test before a worker first uses a tight-fitting respirator, whenever a different facepiece is used, and at least annually after that.
McNeil Safety Consulting performs fit testing on site, at your facility or jobsite, and leaves you with the record the standard requires. Fit testing is carried out by Zennin Sedacey-McNeil, LVN (VN 741259).
What a fit test visit covers
- Fit testing by an OSHA-accepted protocol in Appendix A to the standard, using the same make, model, style and size of respirator the worker will wear.
- Instruction in putting the respirator on, taking it off and performing a user seal check.
- A fit test record for each worker showing the type of test, the make, model, style and size of respirator, the date and the result, as 29 CFR 1910.134(m)(2) requires.
- A check that each worker has a medical clearance on file before the test. Section 1910.134(e)(1) requires the medical evaluation before a worker is fit tested.
How fit testing fits the rest of the program
Fit testing is one element of the written respiratory protection program required by 29 CFR 1910.134(c). Michael Karl McNeil performs the exposure assessment that determines which respirator is needed and writes the program; the fit test confirms that the selected respirator works for each wearer.
What is outside our scope
We do not diagnose, treat or issue medical clearances. Medical evaluations that the standards assign to a physician or other licensed health care professional are performed by the employer’s occupational medicine provider. We schedule, track and document them.
Frequently asked questions
How often is fit testing required?
Before first use, whenever a different facepiece is used, and at least annually. An additional test is required when a change in the worker’s physical condition could affect the fit, such as facial scarring, dental changes, cosmetic surgery or an obvious change in body weight (29 CFR 1910.134(f)(2) and (f)(3)).
Can a worker with a beard be fit tested?
Not for a tight-fitting facepiece. Appendix A does not allow the test when hair grows between the skin and the sealing surface, and 29 CFR 1910.134(g)(1)(i) prohibits wearing a tight-fitting facepiece that way.
Do voluntary-use dust masks need a fit test?
No. Where workers voluntarily wear filtering facepieces and no respirator is required, the employer provides the information in Appendix D and no fit test is required (29 CFR 1910.134(c)(2)).
Schedule fit testing
Call (626) 546-9384 or email mike@mcneilsafetyconsulting.com. See also occupational health services and all services.
States We Serve
McNeil Safety Consulting provides this service to clients in the following states:
- California
- Nevada
- Arizona
- Oregon
- Washington
- Idaho
- Montana
- Utah
- Wyoming
- Colorado
- New Mexico
- North Dakota
- South Dakota
- Texas
- Oklahoma
- Louisiana
- Nebraska
- Alabama
- Arkansas
- Connecticut
- Delaware
- Florida
- Georgia
- Illinois
- Indiana
- Iowa
- Kansas
- Kentucky
- Maine
- Maryland
- Massachusetts
- Michigan
- Minnesota
- Mississippi
- Missouri
- New Hampshire
- New Jersey
- New York
- North Carolina
- Ohio
- Pennsylvania
- Rhode Island
- South Carolina
- Tennessee
- Vermont
- Virginia
- West Virginia
- Wisconsin
To confirm coverage for your site, call (626) 546-9384.